home *** CD-ROM | disk | FTP | other *** search
- This archive contains the latest ROMs für Buddha and
- Catweasel Z-II. Buddha Flash and Catweasel "S-Class" models
- can put the rom image file directly into the flash memory.
- For older models (Buddha, Catweasel Z-II and Catweasel
- Z-II MK2), an Eprom-programmer is necessary. The same rom
- Image files can be used. If you want to test the software
- first, use the expansion drivers and the LoadIDE command.
-
- Use the ReadROM command to backup the contents of your flash
- rom to disk or harddisk.
-
- How to "flash" your controller:
-
- Open a Shell and issue the command
-
- flashbuddha buddha.rom
-
- Then follow the instructions on screen. If you have a
- Catweasel Z-II "S-Class", use the command
-
- flashbuddha catweasel.rom
-
- In both cases, the multitasking will be disabled for a few
- seconds, that's why a warning message will appear before the
- operation starts. Without multitasking, online-connections
- and time-critical programs that run in the background could
- crash, so it's recommended to exit all programs before
- "flashing" your controller.
-
- The new drivers are about 20% faster on harddrives. This
- value has been measured on an Amiga 2000 with a 2630-25
- accelerator board. I'd like to know how good the performance
- boost is for your configuration, so please send me an e-mail
- if you can: sysop@nostlgic.oche.de
-
- best regards,
-
- Jens Schönfeld
-